Saphir Tenax Leather Dye Spray 150ml – 21 White

(3 customer reviews)

£12.69

£12.69

High-coverage white leather dye spray by Saphir, 150 ml. Recolour or refresh smooth leather shoes and boots – water- and rub-resistant once dry.

Temporarily unavailable, please contact us for an alternative

 
Staffelkorting: 2 – 5 stuks: 5% | 6 en meer : 10%


Description

Saphir Tenax Leather Dye Spray – high-coverage white spray for smooth leather

Saphir Tenax in White (21) is a spray-on leather dye with serious covering power, made for smooth leather shoes and boots. Whether you want to completely change the colour of a pair, refresh a shade that has faded, or simply hide scuffs and scrapes, this 150 ml aerosol lets you work quickly and evenly. Because it goes on as a fine mist rather than a brushed-on liquid, you avoid the streaks and tide marks that can spoil a dye job, and you reach seams and creases that a brush would struggle with. It is water- and rub-resistant once dry, so the new white finish stays put through everyday wear. Please note Tenax is for smooth, pigmented leather only – it is not suitable for suede or nubuck. As always with Saphir, you are buying French leather-care expertise that dates back to 1920.

Why choose Saphir Tenax dye spray?

  • Outstanding coverage. A few light coats give a solid, even white finish that hides scuffs and colour loss with ease, so a scruffy pair can look close to new again.
  • Fast and even. The aerosol lays down a fine, uniform mist, so you avoid the streaks and brush marks you can get with liquid dyes. It is genuinely one of the easiest ways to recolour leather at home.
  • Water and rub resistant. Once dry the colour resists water and friction, keeping your shoes looking their best day after day rather than marking your socks or the carpet.
  • Change or refresh. Use it to recolour shoes and boots into a brand-new shade, or simply top up the original colour where it has worn at the toes and heels.
  • Also works on plastic heels. Tenax grips pigmented leather and even plastic heels and trims, so you can finish the whole shoe to one consistent colour.

How to use Saphir Tenax

  1. Clean the shoes thoroughly and brush off all loose dirt.
  2. Go over the leather with a leather cleaner to strip old wax, polish and dye, leaving a bare surface.
  3. Once the shoes are completely dry, shake the can well and hold it about 30 cm away.
  4. Spray light, even layers – several thin coats beat one thick one.
  5. Allow around 15 minutes of drying time between coats and repeat until you reach the finish you want.

My tips for a professional finish

Preparation is everything with a spray dye. Take your time cleaning and stripping the leather first, because any old wax or polish left behind will stop the colour bonding evenly. Mask off soles, laces and any trim you do not want coloured with a little tape, and always work in a well-ventilated space. Build the colour gradually with several passes rather than soaking the leather in one go, and once you are happy with the shade, finish with a matching cream or wax polish the next day to seal the colour and bring up a natural shine.

Specifications

  • Volume: 150 ml aerosol
  • Colour: 21 White
  • Type: High-coverage leather dye spray
  • Suitable for: Smooth, pigmented leather shoes and boots (not suede or nubuck)
  • Finish: Water- and rub-resistant
  • Brand: Saphir (France)

Frequently asked questions

Can I use Tenax on suede or nubuck?
No – Tenax is formulated for smooth, pigmented leather only. For suede and nubuck you will want a dedicated suede dye instead, and I am always happy to point you to the right one.

How many coats will I need?
That depends on how big a colour change you are making. For a light refresh one or two coats is plenty; for a full colour change, build up several thin, even layers, letting each dry first.

Does the colour need sealing afterwards?
It is not essential, but I always recommend a coat of matching cream or wax polish a day later. It locks in the new colour, adds a subtle shine and helps the finish last even longer.

Where can I buy Saphir Tenax White spray in the UK?
You can order it directly from Shoespecialist.co.uk. We offer same-day dispatch when you order before 4pm, and a 60-day return policy.

Additional information

Weight 170 g
Brand

Saphir

Color

021 – White

3 reviews for Saphir Tenax Leather Dye Spray 150ml – 21 White

  1. Donna –

    Perfect coverage for turning pink sneakers white

    (Translated from Dutch)

  2. Constantin Kolotoukhin (verified owner) –

    This product does its job. I’m happy.

    (Translated from Dutch)

  3. Amanda Hofman (verified owner) –

    Works well

    (Translated from Dutch)

Add a review
EAN: 3324010823211 CATEGORIE: TAG:

Also consider:

Alternatives: